How Much Thermal Paste Should I put on My CPU?

How Much Thermal Paste Should I put on My CPU

If you want to buy a computer that doesn’t come with thermal paste, you’ll most likely have to go back to the store and hunt for it. But do you know how much thermal paste to use on your processor? So, in this post, we’ll find out the solution to that question. 

A thermal paste’s functions are unrivaled in terms of assisting the heat sink in increasing the CPU’s cooling capability. As a consequence, the CPU will be able to deliver improved performance and system speed.

What Is Thermal Paste?

A thermal paste is a chemical substance that is thermally conductive and is used as a contact between heat sinks and sources such as high-powered semiconductor devices. It’s also known as thermal grease, thermal compound, or thermal interface material (TIM). It essentially aids in the expansion of the surface of the contact area between two components by filling up tiny gaps with heat-transport-friendly material. 

It is utilized in mechanical and electrical equipment to assist in improving the cooling effect. It prevents the system or equipment from reaching a dangerously high temperature. In computers, this thermal paste is used to connect such components to a cooling unit that includes a fan and a heat sink. [ More Information you can Visit Here: How Long Does Thermal Paste Last In The Tube ]

How Long Does Thermal Paste Last?

The chemical mixes and syringes used by various brands are varied. Some of the brands are Corsair, ARCTIC, Thermal Grizzly, Noctua, and others. If your thermal paste has been stored at room temperature and has not been utilized since it was applied to your CPU, it is likely to be in good condition. The answer to this issue is dependent on how these thermal pastes were made and what components were employed in the manufacturing process. 

The shelf life of the finest thermal pastes is about two years if the tube cap is correctly fitted and the tube is stored at lower temperatures. There’s a risk that the thermal grease will have expired by the time it’s time to apply it again. This is due to the fact that consumers are obliged to install a CPU cooler every few years.

Where To Apply Thermal Paste?

A thermal paste is employed in computer equipment that can link their CPU to a heat sink cooling unit, as you already know. You could already have the best thermal paste applied to a system when you buy it. 

However, you must ensure that this paste is applied to the system’s CPU during the installation process if it has not previously been done. The thermal paste may be required to connect the heat sink to the graphics processor unit on video graphics cards as well. 

How To Apply Thermal Paste?

Thermal paste is commonly offered in the form of a jar, tube, or syringe. A little dab of thermal paste is placed to the upper center of the processor that will be installed into the motherboard of the system during the installation operation. Generally speaking, the dab should be around the size of a BB or less than a pea. However, it is also possible that the dab is the size of a dime. 

The connecting component of the heat sink must then be lowered flat against the processor, squeezing the thermal paste. The thermal paste must spread, which necessitates smaller motions. You may now check to see if the paste is uniformly distributed throughout the processor’s surface. Because this check may cause air bubbles to develop, it should be done as infrequently as possible. A lint-free cloth can be used to clean away any excess thermal paste.

How Much Thermal Paste Should You Put On Your CPU?

A small quantity of thermal paste can be used for a long-term period. Never use more than you need. Squeezing out a “pea-sized” amount of paste straight onto the middle of the CPU’s metal surface is recommended by both Intel and AMD. For bigger CPUs with more cores, you may need a bit more, but remember that less is more. First and foremost, don’t be too concerned if you get a bit more or even a little less. It’s more of a suggestion, and there’s no specific quantity to use. It’ll be great if you just eyeball it.

Don’t try to spread it out after it’s in the middle, and don’t touch it with your finger since oils and other things might create issues. The reason you don’t want too much is that it might extend out past the chip and plate, into the socket itself, and so transmit heat where it shouldn’t. If you apply too little, the worst that can happen is that your CPU will overheat, and your computer will crash. 

Final Thoughts

Thermal pastes play an important part in the health of a computer device. Its characteristics are what keep the system running smoothly. The technique of applying thermal paste is fairly simple. It’s really simply an issue of not using too much and making sure you’re using the proper side of the processor.